Table 2 3D-printed components and costs for the Camelot setup. A detailed breakdown of the 3D-printed components required for the Camelot setup (Additional File 3: Dataset). Costs are provided in GBP
From: Camelot: a computer-automated micro-extensometer with low-cost optical tracking
Component | Material | Filament | Infill (%) | Supports | Rotation (\(^\circ\)) | Filament use (g) | Printing time (h) | Cost (GBP) |
|---|---|---|---|---|---|---|---|---|
Linear motor stage | PETG | Matte black, matte white | 20 | Build plate | - | 88.3 | 3.2 | 2.36 |
Calibration stand | PETG | Matte black | 20 | Build plate | - | 86.5 | 3 | 2.30 |
Electronics box | PLA | Matte black | 20 | Everywhere, tree | - | 102 | 3.6 | 2.04 |
Box lid | PLA | Matte black | 20 | Build plate | Y: 180 | 121.2 | 3.7 | 2.15 |
Actuator arm | PETG | Matte black | 40 | Everywhere, tree | Y: 180 | 3.1 | 0.5 | 0.09 |
Sensor arm | PETG | Matte black | 80 | Everywhere, normal | - | 0.7 | 0.3 | 0.02 |
Stage holder | PETG | Matte black | 20 | - | - | 202.8 | 6.5 | 5.35 |
Total | 604.5 | 21 | 14.31 | |||||